3rd Gen High Performance and Accessories (5.9L Only) Talk about Dodge/Cummins aftermarket products for third generation trucks here. Can include high-performance mods, or general accessories. THIS IS FOR THE 5.9L ONLY!

Smarty + TST hp #'s

Thread Tools
 
Search this Thread
 
Old Sep 27, 2006 | 09:54 PM
  #1  
fjbiker86's Avatar
Thread Starter
Registered User
 
Joined: Nov 2005
Posts: 210
Likes: 0
From: folsom,ca
Smarty + TST hp #'s

anyone have some dyno proven hp #'s from this combo? -thanks
Reply
Old Sep 27, 2006 | 09:59 PM
  #2  
Luken's Avatar
Registered User
 
Joined: Jul 2005
Posts: 1,944
Likes: 0
HP numbers vary among trucks depending on how many other supporting mods you have.

tst/smarty, 66 turbo, fuel system, will get you between 500-550 if I was guessing. More mods like a modded cp3, injectors, etc will add to it.

Im sure I'll get corrected if I'm wrong
Reply
Old Sep 27, 2006 | 10:08 PM
  #3  
fjbiker86's Avatar
Thread Starter
Registered User
 
Joined: Nov 2005
Posts: 210
Likes: 0
From: folsom,ca
Well I was assuming that the people with these mods also have stuff to support it (air, fuel pressure, tranny etc) ..I know that each truck dynos different Im Just kinda curious to see what people are making with this stack-thanks for the reply though
Reply
Old Sep 27, 2006 | 10:18 PM
  #4  
RamWheelsBy4's Avatar
Registered User
 
Joined: Aug 2004
Posts: 3,697
Likes: 1
From: Houston, TX
Should be a few with Smarty stacks get dyno's at the DHRA Houston event in about two weeks. I will try a couple of different combos with TST, EZ and Smarty. Last year with BD Triple Dog, TST and EZ dyno't 522rwhp. I think I had the TST set too high on those pulls. Truck is 1/2 second faster with the Smarty over the BD Triple Dog, so I am expecting around 550rwhp with my mods.
Reply
Old Sep 27, 2006 | 11:05 PM
  #5  
fjbiker86's Avatar
Thread Starter
Registered User
 
Joined: Nov 2005
Posts: 210
Likes: 0
From: folsom,ca
Dang, a half second faster w/ the smarty instead of the BD is pretty darn good. ya let us know on those #'s ,cant wait
Reply
Old Sep 27, 2006 | 11:06 PM
  #6  
fjbiker86's Avatar
Thread Starter
Registered User
 
Joined: Nov 2005
Posts: 210
Likes: 0
From: folsom,ca
what are your 1/4 times and mph...does the smarty make your truck cut out in the 1/4..Ive heard people say the smarty has great bottom and and great top end but in the middle it kinda cuts out?
Reply
Old Sep 28, 2006 | 09:47 AM
  #7  
RamWheelsBy4's Avatar
Registered User
 
Joined: Aug 2004
Posts: 3,697
Likes: 1
From: Houston, TX
Originally Posted by fjbiker86
what are your 1/4 times and mph...does the smarty make your truck cut out in the 1/4..Ive heard people say the smarty has great bottom and and great top end but in the middle it kinda cuts out?
Well I am still trying to find the best stack combo. I have had about 10 runs with the Smarty so far. With any TST TE setting above 0 I do have popping issues on the back half.

Best stack so far for my truck has been TST w/05Twins program on 2/0, EZ 2, Smarty SW #8. Sometime a little hiccup around OD shift but not bad or everytime.

Six 1/4 mile runs at those settings were:

13.00s @ 105.3mph (Low boost launch)
12.79s @ 104.1mph (Video & slips at www.putfile.com/texascrude)
12.47s @ 106.0mph (Video in signature)
13.00s @ 102.0mph (Poor boost launch)
12.77s @ 105.8mph
12.81s @ 106.0mph (Blew rear Freeze Plug on this run)
Reply
Old Sep 28, 2006 | 04:12 PM
  #8  
fjbiker86's Avatar
Thread Starter
Registered User
 
Joined: Nov 2005
Posts: 210
Likes: 0
From: folsom,ca
thanks for the great info
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Topper
3rd Gen High Performance and Accessories (5.9L Only)
6
Mar 3, 2008 10:17 AM
LooseBoltsRob
3rd Gen High Performance and Accessories (5.9L Only)
17
Jun 10, 2007 08:52 PM
lewis369
3rd Gen High Performance and Accessories (5.9L Only)
6
May 29, 2007 06:23 PM
smoky beast
3rd Gen High Performance and Accessories (5.9L Only)
28
Oct 13, 2006 01:15 PM
CTD_Neil
Performance and Accessories 2nd gen only
10
Feb 23, 2006 09:27 PM




All times are GMT -5. The time now is 08:39 PM.