Show me pics of trucks w/ wheels and tires but NO LIFTS!

 

Going to add wheels and tires to my rig but NO LIFT, I think i am going to go with 305/70R17s.

 

That was before the leveling kit..

Shane

 

wheel and tire specs would be cool also, in case i see come i like

 

here is mine

Kevin

 

Kevin, what are the wheel and tire specs?

 

Here's with 315/70-17D Coopers:



Slight rubbing on the front traction bars (is that the right part name?) when turning close to full lock either way. Easy to avoid except when making U-Turns...

Otherwise, no problems. Mounted on the stock rims too.... 20k miles and still 3/4 tread left and wearing perfectly. 50 lbs in the front and 35 in the rear -- except when towing. REALLY softened up the ride.

 

This is mine after I removed the lift and lowered the rear. Went from 2" leveled and 315s to stock level front and lowered rear and Power Wagon wheels and 285s.

 

No lift with 33" tires

 

PatriotBlu,

You're refering to the upper control arms.

 

 

[IMG][/IMG]

17X9 wheels. 295/70 17 tires

 

Thanks Pauly!!!

So that's the bar that the rear of the tire hits when turned in that side's direction? For instance, when turning right, the inside rear of the right tire hits that bar on my 4x4. It's a soft rub and I've only done it a few times.

Problem comes in when a valet or a porter at the dealer wants to drive...

What's the best fix -- a lift? Spacer? Smaller tires

 

Sorry about that, they are eagle alloys 0836 rims 20 x 8.5 +25 mm offset. the tires are falken stz4 305 50 20, No rubbing whatsoever.

Kevin

 

Jay, if you put in a 2 " leveling kit it will fix it right up,, no problems,, just have to get a wheel alignment when done, and have the tech advance the castor to max

kevin