3rd Gen High Performance and Accessories (5.9L Only) Talk about Dodge/Cummins aftermarket products for third generation trucks here. Can include high-performance mods, or general accessories. THIS IS FOR THE 5.9L ONLY!

right clutch kits for hauling and fun

Old Nov 1, 2009 | 07:30 PM
  #1  
06dodgepower's Avatar
Thread Starter
Registered User
 
Joined: Nov 2009
Posts: 1
Likes: 0
From: CONWAY, AR
right clutch kits for hauling and fun

Im looking for help picking the right clutch for my 06 2500 2wd ram, I travel alot with work and haul a 30ft fifth wheel camper all over the US. I have a hypertech chip, and putting a flowmaster hush cat back exhaust. I was going to buy the Centerforce DX clutch but it is back ordered until Feb, and Looked at Southbends but still unsure. I want something that will handle the hauling but can enjoy the power while unhooked. Any suggetions

thanks
Reply
Old Nov 1, 2009 | 07:40 PM
  #2  
03RAMBUNCTIOUS's Avatar
I watch wind blow...
 
Joined: Dec 2006
Posts: 1,390
Likes: 0
From: Red Dirt territory of TEXAS
Most everyone on here will tell you to go SouthBend.

I run a Valair. and it has been great to me. holds the power, quiet. half the price of a SB and the customer service with Valair has been top notch in my opinion. ( I have no dealings with SB)

Welcome to DTR, What do you do for a living? I will be traveling the US to after I graduate school May 2010 ( going to be working on Wind Turbines)
Reply
Old Nov 1, 2009 | 07:45 PM
  #3  
rich's Avatar
Registered User
 
Joined: Aug 2002
Posts: 3,308
Likes: 1
From: Kerrville eastern new mexico, west texas
i have run sb on all my other trucks and they have done real well, never a problem. they were chipped and hauled heavy. i have a valair on my 06 only because i was not in a good money positon to get a sb. the truck is stock but tows heavy, you will have to get the hydraulic upgrade, i am still running the stock, it's working but will have to be changed out. i have had no problems with it other then i do get a little more noise then the stock one but i dont mind it cuz i am rid of the dm flywheel
Reply
Old Nov 1, 2009 | 09:17 PM
  #4  
CD in NM's Avatar
Registered User
 
Joined: Aug 2006
Posts: 3,113
Likes: 0
From: New Mexico
When I do my clutch, it will be the South Bend. So far, I have had NO clutch problems, but when it gets replaced it will get the SB clutch and hydraulic kit too.

CD
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
penguinman
1st Gen. Ram - All Topics
10
Aug 15, 2011 05:59 PM
LLoTuner
1st Gen. Ram - All Topics
6
Apr 9, 2008 11:28 PM
red_neck1984
1st Gen. Ram - All Topics
2
Feb 6, 2008 03:23 PM
Igor
3rd Generation Ram - Non Drivetrain - All Years
1
Aug 6, 2007 09:39 AM
deputyski
Performance and Accessories 2nd gen only
4
Apr 3, 2005 09:01 PM


Thread Tools
Search this Thread

All times are GMT -5. The time now is 12:18 AM.