3rd Gen High Performance and Accessories (5.9L Only) Talk about Dodge/Cummins aftermarket products for third generation trucks here. Can include high-performance mods, or general accessories. THIS IS FOR THE 5.9L ONLY!

Ordering new mods tommorow!

Thread Tools
 
Search this Thread
 
Old Feb 10, 2007 | 11:44 PM
  #1  
acook's Avatar
Thread Starter
Banned
 
Joined: Feb 2006
Posts: 1,221
Likes: 1
From: C.S.U. Pueblo Co.
Ordering new mods tommorow!

Finally got the card pryed from my wallet(it was a fight but i did it). Tommorow im going to order a II stage 2 CP3, 120hp ish sticks, nitrous kit, and water meth. Since im so busy it might be a few weeks till i get them installed but it should be interesting. Without the nos or meth what should i be looking at for hp when i get my scary larry(itll be stacked with the EZ on 2)?
Reply
Old Feb 10, 2007 | 11:47 PM
  #2  
Luvnacumns's Avatar
Banned
 
Joined: Dec 2005
Posts: 5,194
Likes: 0
From: Twin Falls, Idaho
Good Menu to choose from.. should keep you busy for a while I would gess with your set-up twins and all you should be in the mid 6's ?? Wicked1 dynod in the high 7's with about the same set-up.... If I remember what he's running.. I'll have to look.

Shane
Reply
Old Feb 11, 2007 | 12:08 AM
  #3  
acook's Avatar
Thread Starter
Banned
 
Joined: Feb 2006
Posts: 1,221
Likes: 1
From: C.S.U. Pueblo Co.
Im just hoping that ill have fuel left to add a little spray?
Reply
Old Feb 11, 2007 | 12:29 AM
  #4  
Luvnacumns's Avatar
Banned
 
Joined: Dec 2005
Posts: 5,194
Likes: 0
From: Twin Falls, Idaho
You will definately be pushing it!!! Let us know though..

Shane
Reply
Old Feb 11, 2007 | 12:33 AM
  #5  
Luvnacumns's Avatar
Banned
 
Joined: Dec 2005
Posts: 5,194
Likes: 0
From: Twin Falls, Idaho
Check this fellas truck and number out!!! You should be up there!!

Shane

https://www.dieseltruckresource.com/...=1#post1350349
Reply
Old Feb 11, 2007 | 12:39 AM
  #6  
acook's Avatar
Thread Starter
Banned
 
Joined: Feb 2006
Posts: 1,221
Likes: 1
From: C.S.U. Pueblo Co.
Originally Posted by Luvnacumns
Check this fellas truck and number out!!! You should be up there!!

Shane

https://www.dieseltruckresource.com/...=1#post1350349

If i get close to 700 ill be exstatic!!
Reply
Old Feb 11, 2007 | 12:40 AM
  #7  
Luvnacumns's Avatar
Banned
 
Joined: Dec 2005
Posts: 5,194
Likes: 0
From: Twin Falls, Idaho
Originally Posted by acook
If i get close to 700 ill be exstatic!!
That's the number I am after too.. I am just doing all of my cosmetic stuff first... I will also be running ICD Twins by Nathan!!

Shane
Reply
Old Feb 11, 2007 | 12:52 AM
  #8  
maddog madden's Avatar
Registered User
 
Joined: Sep 2006
Posts: 283
Likes: 0
From: Colorado
hey acook, if you want a snow water/meth stage 3 with the 220 psi pump and dual nozzle setup, ill sell you mine, almost bran new, pumped less then 5 gallons of water/meth, pm me if your interested
Reply
Old Feb 11, 2007 | 12:55 AM
  #9  
WUnderwood's Avatar
Registered User
 
Joined: Jan 2006
Posts: 1,618
Likes: 0
From: TEXAS
I say you'll be around 750 or so, depending on how much water meth/nitrous you spray at it
Reply
Old Feb 11, 2007 | 09:32 AM
  #10  
acook's Avatar
Thread Starter
Banned
 
Joined: Feb 2006
Posts: 1,221
Likes: 1
From: C.S.U. Pueblo Co.
At first i was just hoping for 650, but im really wanting to run an extremly low 12/ or high 11 this coming year with my truck. I think i have a good chance since its a single cab to. May have to get a few more goodies though.
Reply
Old Feb 11, 2007 | 05:03 PM
  #11  
goodeyesniper75's Avatar
Chapter President
 
Joined: May 2006
Posts: 1,253
Likes: 0
From: Kinnelon,NJ
700 would be crazy man what sticks are you getting
Reply
Old Feb 11, 2007 | 09:26 PM
  #12  
acook's Avatar
Thread Starter
Banned
 
Joined: Feb 2006
Posts: 1,221
Likes: 1
From: C.S.U. Pueblo Co.
Im getting a smoking deal on some dynomite injectors. They will be custom, something like 120-140hp ish. Those will be ordered monday and im going to have to talk to dynomite and see what they say.

Madden: i dont need the water meth, my brothers business partner is giving me his, and my brother is given me his old nitrous setup since hes going with a progressive system on his new race truck. Thanks anyways.

I finally got my CEL fixed today for my overboost code, the guys at elite diesel built me a boost fooler so now i only have my abs and parking brake(bullydog tq management delete). It finally starting to come together so it should make for an interesting year.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
LUKE-MM-PULLER
General Diesel Discussion
8
Feb 11, 2008 10:48 PM
frunko1
3rd Generation Ram - Non Drivetrain - All Years
24
Sep 3, 2006 07:54 PM
redhornet
HELP!
4
May 28, 2004 03:09 PM
2broke2smoke
Performance and Accessories 2nd gen only
8
Feb 27, 2004 03:22 AM




All times are GMT -5. The time now is 12:15 AM.