Need Bushing made for Aurora 5K
#1
Registered User
Thread Starter
Join Date: Aug 2006
Location: Salem, IN
Posts: 359
Likes: 0
Received 0 Likes
on
0 Posts
Need Bushing made for Aurora 5K
Does anyone out there know of anybody who can make a bushing for the inducer side of the turbo from 2.8 inches to 2.5 inches. I have an Aurora 5K and would love to get in the workstock class at scheids but need to find someone who can make one of these fairly quick. I tried enterprise engine and I called Scheid but couldn't get a hold of anyone. I don't want to blow a wod on a bushing that I'll probably only use once. I would think 100 dollars would be reasonable. I hope I don't have to pull the turbo off to get it made I figured with the Aurora being so common somebody had surely made one.
__________________
__________________
#4
Registered User
Join Date: Nov 2002
Location: Salem,In.
Posts: 745
Likes: 0
Received 0 Likes
on
0 Posts
#7
Registered User
Thread Starter
Join Date: Aug 2006
Location: Salem, IN
Posts: 359
Likes: 0
Received 0 Likes
on
0 Posts
I did get a hold of someone that makes them, he runs a duramax and he was going to call ATS and make sure the inlet side was the same as a dodge which we are both pretty sure they are. He's going to make me one for 30$ and he's made a few for the auroras. If for some reason this guy can't make one I'll be sure and give Josh a call.
Thread
Thread Starter
Forum
Replies
Last Post
OutOfSight
3rd Gen High Performance and Accessories (5.9L Only)
7
07-27-2009 12:14 AM
the496rocket
Performance and Accessories 2nd gen only
30
07-02-2009 11:03 AM