My go at a mini skid plate
#1
Registered User
Thread Starter
Join Date: Dec 2010
Location: North Hollywood, CA
Posts: 105
Likes: 0
Received 0 Likes
on
0 Posts
My go at a mini skid plate
While out wheeling I scraped up a few spots in the front and having the transmission lines exposed so much got me thinking. So I went over to my dads house was looking at his pile of scrap metal and fabbed up a mini skid/rock plate kinda thing.
My thought is to tap in the frame then bolt her up the tube steel will protect the lines and I may extend the flat section some bit.
My thought is to tap in the frame then bolt her up the tube steel will protect the lines and I may extend the flat section some bit.
#3
Registered User
Thread Starter
Join Date: Dec 2010
Location: North Hollywood, CA
Posts: 105
Likes: 0
Received 0 Likes
on
0 Posts
Ahh those are from some time ago... One a party I went to and every1 was passed out... So I took the keg to another party and the other one I dont recall where I got it from.
The 2nd part is to tap into the frame rail that part I don't know how to do so waiting for the ole man to clear up his schedule. I'm thinking extending the plate steel near the sway bar.
The 2nd part is to tap into the frame rail that part I don't know how to do so waiting for the ole man to clear up his schedule. I'm thinking extending the plate steel near the sway bar.
Thread
Thread Starter
Forum
Replies
Last Post
West Coast
General Diesel Discussion
2
03-03-2009 09:25 PM
Vittorio
3rd Generation Ram - Non Drivetrain - All Years
3
07-28-2003 05:38 PM
Vittorio
3rd Generation Ram - Non Drivetrain - All Years
2
05-18-2003 03:14 PM