K01 recall nightmare
#1
Registered User
Thread Starter
Join Date: Apr 2008
Location: Suisun Ca.
Posts: 210
Likes: 0
Received 0 Likes
on
0 Posts
K01 recall nightmare
had my recall done today, drove away with the secuirty light blinking after flash, stopped and shut truck off and would not restart. had to tow the vehicle back to dealer who said that was between me and chyrsler.After checking on the DTR site I learned that 06-07 will somtime times loose the key skim and module during re-flash. I attempted to share this with the Dealer, who replied don't tell me how to do my job.After some discussion they looked at the truck and called chyrler who confirmed and had them change the Key module and replace my keys.
the dealer balme the lost data on my Fass pump and wireless alarm, sooo 500.00 later truck is back running and the problem was just what i was telling them I learned on the site.
Now my smarty says soft ware not recognizable ??
the dealer balme the lost data on my Fass pump and wireless alarm, sooo 500.00 later truck is back running and the problem was just what i was telling them I learned on the site.
Now my smarty says soft ware not recognizable ??
#5
Registered User
Thread Starter
Join Date: Apr 2008
Location: Suisun Ca.
Posts: 210
Likes: 0
Received 0 Likes
on
0 Posts
California is now placing a hold on the renewal.
Truck passed smog, smog certificate said need recall slip,I attempted to register online and the online registration is revolked now.
#7
Registered User
Thread Starter
Join Date: Apr 2008
Location: Suisun Ca.
Posts: 210
Likes: 0
Received 0 Likes
on
0 Posts
Trending Topics
#8
Registered User
#9
Registered User
Join Date: Apr 2008
Location: Colorado
Posts: 133
Likes: 0
Received 0 Likes
on
0 Posts
Mine was done about a month ago. I've got the ST, so I don't have all the bells and whistles. So far, I have not experience any ill affects. California has us by the ***** on this one. If the housing market wasn't so bad, I would be gone. This state is so screwed up.
#11
Registered User
Thread Starter
Join Date: Apr 2008
Location: Suisun Ca.
Posts: 210
Likes: 0
Received 0 Likes
on
0 Posts
Spoke with Bob and he says< MADS has toupdate a new software before you can use your smarty again. The software should be released in 7-10 days
#12
Registered User
Thread Starter
Join Date: Apr 2008
Location: Suisun Ca.
Posts: 210
Likes: 0
Received 0 Likes
on
0 Posts
I should have pushed harder on having chrysler pay for the modules since I know they have a history in their data, and I guess not every truck repsonds the way mines did but for sure the 06-07 year is where the problem has shown up.
#13
Registered User
Hmm interesting that Marco has to come up with yet another update. Contact Dodge and complain about having to replace a skim module and chipped keys that worked fine prior to the flash. I think they'll pay. Tell them that the truck failed to function after a Chrysler reflash. Mention that you'll contact the NHTSA about the incident if they fail to pay.