intank I7187M pump
#1
Registered User
Thread Starter
intank I7187M pump
Anyone running a Airtex E7187M Fuel Pump Module Assembly?
Opions?
It seems to be rated at a decent flow & pressure.
I'll be w/o a lift pump while my FASS goes back to get repaired and figured why not have another one as a permanent install (rather than temp) if the FASS dies, or vice versa. The FASS will be using a draw straw. I figure I am going to drop the tank anyway to clean it out so do both at the same time.
I also have a Walbro GSL-392 but would need a pressure reg for that one... I also have a Carter P4070 I could use...
And yes, it really pisses me off my FASS has been very loud from day one and I don't think it ever worked.
Any imput would be great.
Opions?
It seems to be rated at a decent flow & pressure.
I'll be w/o a lift pump while my FASS goes back to get repaired and figured why not have another one as a permanent install (rather than temp) if the FASS dies, or vice versa. The FASS will be using a draw straw. I figure I am going to drop the tank anyway to clean it out so do both at the same time.
I also have a Walbro GSL-392 but would need a pressure reg for that one... I also have a Carter P4070 I could use...
And yes, it really pisses me off my FASS has been very loud from day one and I don't think it ever worked.
Thread
Thread Starter
Forum
Replies
Last Post
6 2 Carl
3rd Generation Ram - Non Drivetrain - All Years
2
11-27-2010 09:55 AM
Bigsmoke3500
3rd Gen High Performance and Accessories (5.9L Only)
16
01-01-2008 09:32 PM
macjazzy
24 Valve Engine and Drivetrain
55
06-08-2006 04:13 PM