Fuel Filter Position
#1
Registered User
Thread Starter
Fuel Filter Position
Can an auxiliary fuel filter (Donaldson P551313 or Cat 1R-0750) be mounted in a horizontal position and still be effective. This may be done to increase ground clearance.
Thanks John
Thanks John
#2
Registered User
my opinion is filtering occurs when the fuel enters the filter under pressure regardless of position....maybe i'm wrong
#4
Registered User
so it must be mounted vertically
#6
Im sorry to say i dont have the answer because I would like to know also. I definitely have never seen any diesel fuel filters mounted horizontally. I just picked up a 3rd gen and want to add a 2 micron cat and the fass stock replacement pump. I dont like frame mounted filters hanging down because I am often off road for work. There is not much room under the hood either.
#7
Last edited by cromulius; 09-07-2018 at 04:22 PM. Reason: Additional info
Thread
Thread Starter
Forum
Replies
Last Post
bob95065
12 Valve Engine and Drivetrain
21
08-21-2007 05:16 PM
halerazor
Performance and Accessories 2nd gen only
5
05-04-2004 09:55 AM