Cold start issues even at 70 deg, truck stalls after starting usally takes 3 to 6 ti.
#1
Cold start issues even at 70 deg, truck stalls after starting usally takes 3 to 6 ti.
And sometimes revels up at light and stalls shall breaking , but main issue is starting ,it fires instantally but stalls and I live in florida does it even at 80 deg, worse as it gets colder . I have to plug in heater every morning , any ideas
#3
p083 cooling fan, but that code has been there for about 6 yrs and hundred tho miles ,
I don't have any way to check fuel pressie,in going to have that done , is there a :check valve in pump ? Maybe draining back over night, it is stock pump,
what about , fca, fuel controls acuator ? Do I have that sensor ,it was not where I was told ,
Iv had the truck for 12 yrs, it has 250 thousand miles , it started 8 yrs ago, start and stall 1 time , every morning now it's 3 to 6, at least 1 Tim a week it stays on , runs like new 99 % of the time , iv never had anything on engine replaced , replace fuel filter every oil change ,
I don't have any way to check fuel pressie,in going to have that done , is there a :check valve in pump ? Maybe draining back over night, it is stock pump,
what about , fca, fuel controls acuator ? Do I have that sensor ,it was not where I was told ,
Iv had the truck for 12 yrs, it has 250 thousand miles , it started 8 yrs ago, start and stall 1 time , every morning now it's 3 to 6, at least 1 Tim a week it stays on , runs like new 99 % of the time , iv never had anything on engine replaced , replace fuel filter every oil change ,
Thread
Thread Starter
Forum
Replies
Last Post
kinghomes
3rd Gen Engine and Drivetrain -> 2003-2007
1
09-25-2007 03:16 PM
Hayseed
12 Valve Engine and Drivetrain
2
02-13-2007 11:00 AM
kleinergti1
12 Valve Engine and Drivetrain
12
07-12-2006 10:47 AM
Hounddog
3rd Gen Engine and Drivetrain -> 2003-2007
3
02-14-2006 06:33 PM