BD Top speed eliminator... anyone use it?
Registered User
Joined: Jan 2004
Posts: 2,696
Likes: 1
From: Maritimes, Canada
Nope, RAD is 305/555 only.
Doesn't the turn key forward to start eliminate the speed limiter on the 04.5....and up. If it does then pulling the ABS relay will work. And no the starter will not engage when the truck is moving. ks
Doesn't the turn key forward to start eliminate the speed limiter on the 04.5....and up. If it does then pulling the ABS relay will work. And no the starter will not engage when the truck is moving. ks
Registered User
Joined: Mar 2007
Posts: 416
Likes: 0
From: Cypress Texas
I have tried the turn key to start and it does not work on my 06.
Registered User
Joined: Jan 2005
Posts: 1,226
Likes: 0
From: vernon b.c. canada
be careful when pulling fuses,i tried pulling the #35 fuse and i lost the speedo and speed limiter which was good but also lots of power which was bad.i think some other things are cotrolled from that fuse,i had to put it back
Registered User
Joined: Apr 2007
Posts: 1,049
Likes: 2
From: Skiatook OK currently Pecos TX
BTW Wunderwood it weighed 11,500lbs not 7,000 had 225,000miles on her and was rolling on 900/16 bias ply nylon military tires. A trooper buddy of mine clocked the welding rig at 147mph. She floated just a touch.
Banned
Joined: Dec 2005
Posts: 5,194
Likes: 0
From: Twin Falls, Idaho
No need to go 156 just miss the top speed that I had with my 97 and the 4000gov spring kit. Theres nothing like watching an MX3 die at 120 and leaving him like he put on the brakes. This was with the welding bed, tools bottles and SA200 welding machine. The guy followed me 15 miles until I got to work just to shake my hand and see what I had in my old work truck.
BTW Wunderwood it weighed 11,500lbs not 7,000 had 225,000miles on her and was rolling on 900/16 bias ply nylon military tires. A trooper buddy of mine clocked the welding rig at 147mph. She floated just a touch.
BTW Wunderwood it weighed 11,500lbs not 7,000 had 225,000miles on her and was rolling on 900/16 bias ply nylon military tires. A trooper buddy of mine clocked the welding rig at 147mph. She floated just a touch.
YOU DA MAN!!!!
Registered User
Joined: Apr 2007
Posts: 1,049
Likes: 2
From: Skiatook OK currently Pecos TX
Registered User
Joined: Feb 2006
Posts: 874
Likes: 0
From: West Virginia
I would say yes for top speed. Might want to get a set of Don M's springs though. high RPMS will float valves on stock springs I was told. Then I read other guys posting that they wont. I got them for security. Also - 200 sounds a little high. I got mine for 174.00.
Registered User
Joined: Feb 2007
Posts: 240
Likes: 0
And to think, I get nervous at 108 MPH. I could not imagine this truck going another 40 mph. Dude, I must say, you got stones!!!
Registered User
Joined: Dec 2005
Posts: 95
Likes: 0
My truck and the silver truck from relentless diesel both use the bd speed eliminator.Without it we would be stuck at 109 mph.This past weekend I ran 122mph in the 1/4 mile with mine,so I think they work well.
Thread
Thread Starter
Forum
Replies
Last Post
GT42R
3rd Gen High Performance and Accessories (5.9L Only)
5
Oct 4, 2007 08:15 PM
BigDave12768
3rd Gen High Performance and Accessories (5.9L Only)
14
Oct 5, 2006 02:36 AM
streetsmoker
3rd Gen High Performance and Accessories (5.9L Only)
17
Jun 16, 2006 04:09 PM
OT-OF-Here
3rd Gen High Performance and Accessories (5.9L Only)
3
Oct 14, 2005 09:47 PM
cquestad
3rd Gen High Performance and Accessories (5.9L Only)
7
May 2, 2005 08:48 PM
