Not mentioning any brand names but I am on my third set of white face gauges to match my common rail. I have had every issue from not matching my dash, dead probs, dead gauges, flickering boost needle, different color and brightness lights etc...

Well now I have the White Faced Isspro series and could not be happier, wish I went this way fir$t!

The new Isspro's look great and are very accurate. I have ordered some for stock if anyone else is having these issues and would like a set.

 

I like the Autometer phantom series. White face and green lighting really match the 03 gauges. I will say that the boost gauge kinda jumps. When I had the 60psi gauge it didn;t but the 100psi gauge kinda jumps. Other than that they match day and night to the factory gauges pretty good. Isspro look pretty darn close too. Would have to see them at night with the green lighting.

 

I liked the way the Auto meters looked but 3 pyros and and a screwy boost gauge later... I gave up.

 

Nice to know i have a fall back option. Thanks

 

Great gauges! I went with them to start with on my three gauge pillar mount. Now I'm feelin better for having spent the extra bucks and doing it right with the right stuff.

Right on.

https://www.dieseltruckresource.com/...d.php?t=189391

 

That's odd - I've used AutoMeter gauges for years w/o any problems... I think the Danin gauges most closely match the OEM style, although they are a bit more expensive.

 

Thanks for rubbing that in LOL

 

Heres a pic.A little blury.The pillar gauges are Isspro and the steering column is Danin Optix.The Optix faces match the factory instruments better but the lighting of the Isspro is closer in my opinion.

 

Issapro or Diprocal is the only way to go anymore...

I have seen a bunch of dead Auto's lately.

 

I think they had a really bad run of pyros probes about a year ago which caused a lot of my problems.

 

Isspro all the way. I had a dead pyro, got replaced with a new gauge and amp box direct from Isspro. The problem eventually turned out to my error, some burnt fuses, one of them powering my pyro. Now the gauge works better than ever!

 

I'm thinking of going to Issopro- I can't stand the Blue light from autometer and my newest set 2 colors match while the other is almost purple

 

Same thing here. I kept shorting wires out and I had a bunch of problems with my gauges. I thought for the longest time that the ISSPRO gauges were junk but it turned out to be my fault. ISSPRO sent out numerous boxes/gauges without any questions. They match my OEM gauges to a "T".

The only thing I dislike is the fact that the 3 pod pillar on my A-Frame sortive blocks my view, especially going around corners. But that isn't ISSPRO's fault, thats mine for mounting it there. lol

 

How do the Diprocal gauges match up to the interior guages??

I was looking into some..

 

I am not a fan of the pillar mount either, this is were I mounted mine, they are in a great spot for visibility and look good. The one thing I would do different is mount them a little closer to the center of the dash, the light at night reflects into my line of sight.