banks six gun install

Reply Subscribe

Thread Tools

Search this Thread

Aug 16, 2004 | 09:37 PM

nxpress

Thread Starter

Registered User

Joined: Jan 2004

Posts: 18

Likes: 0

From: dallas texas

banks six gun install

Is the banks six gun w/the speed loader a plug and go or do you have to splice into wires -- may have already been discussed but I did a search and didnt find anything -- thanks in advance

Aug 17, 2004 | 03:16 AM

SuperGewl

Registered User

Joined: Feb 2003

Posts: 1,915

Likes: 0

From: Beaverton, Oregon

It is just plug in, however you will have some difficulty getting the wire run thru the firewall. It's a real Bear to run. Have fun with the install of the pyro pre turbo.

Aug 17, 2004 | 08:41 AM

gdh11

Guest

Posts: n/a

Just follow the instructions on the Banks sheets. As far as the pyro install just tape up the exhaust pipe and drill out the hole and tap it with the truck running and wear leather gloves. It worked great for me and had no chips in the manifold. Actually did two holes like that one for the pyro and one for the thermal protection.