3rd Gen High Performance and Accessories (5.9L Only) Talk about Dodge/Cummins aftermarket products for third generation trucks here. Can include high-performance mods, or general accessories. THIS IS FOR THE 5.9L ONLY!

2003 edge mod in a 2005 or 2006 (A 600 cummins)

Old Sep 15, 2006 | 12:43 PM
  #1  
notblowingsmoke's Avatar
Thread Starter
Registered User
 
Joined: Sep 2006
Posts: 41
Likes: 0
From: las vegas, nv
Cool 2003 edge mod in a 2005 or 2006 (A 600 cummins)

I just bought a new truck (2006 Dodge Ram 3500) last week and took my 2003 edge module off of the 03 and scence I know electronics. I decided to dig a little bit deeper into the idea of putting it on the new truck. so after looking at the circuts I saw no reason that it wouldn't work the same on my new 2006. guess what it worked, really GOOD. Man I have never seen milage like this befor! It is getting a wopping 33 mpg and that is no joke. So for those of you out there who own or have owned a 03 to 04 and is thinking of buying or have already bought a new 04.5-06. Dont waste you money on a new module just use the one you have and you will be surprised!
Reply
Old Sep 15, 2006 | 01:22 PM
  #2  
cquestad's Avatar
Registered User
 
Joined: Dec 2003
Posts: 5,540
Likes: 0
From: Boise, Idaho
35,000 psi on the rail will do that till something breaks...LOL
Reply
Old Sep 15, 2006 | 01:33 PM
  #3  
MX429's Avatar
Registered User
 
Joined: Jun 2006
Posts: 156
Likes: 0
Soemthing smells like........a troll.
Reply
Old Sep 15, 2006 | 01:48 PM
  #4  
staarma's Avatar
Registered User
 
Joined: Jul 2005
Posts: 2,953
Likes: 0
From: Belgrade, Montana
Sorry pal it won't work. The ECM is different and no longer has the data link streaming port connector hanging out of the side of it like the early CR's do.

Nice try though. Next time, go with something like 23 MPG. The jig won't go up so fast.
Reply
Old Sep 15, 2006 | 02:13 PM
  #5  
streetsmoker's Avatar
Chapter President
 
Joined: Sep 2005
Posts: 1,562
Likes: 0
From: Tupelo, MS
There for a second I had to go check the calendar to see if it was April 1st allready
Reply
Old Sep 15, 2006 | 02:18 PM
  #6  
MikeyB's Avatar
Registered User
 
Joined: Oct 2002
Posts: 7,543
Likes: 4
From: Tomball, Texas
The '03/04 EZ will work on the 600's. BUT, the rail pressure will be too high and eventually damage the injectors and or the pressure relief valve.
The '03/04 SO and HO Cummins ran at a lower rail pressure than the 600's.
BTW, the EZ only uses the MAP and rail pressure and I highly doubt the 33mpg claim.....

MikeyB
Reply
Old Sep 15, 2006 | 03:22 PM
  #7  
bighornram's Avatar
Registered User
 
Joined: Sep 2006
Posts: 684
Likes: 1
From: Delta, PA
33 mpg?? Next time take it off the jackstands before you calculate mileage- i hear its more accurate that way.
Reply
Old Sep 15, 2006 | 03:55 PM
  #8  
staarma's Avatar
Registered User
 
Joined: Jul 2005
Posts: 2,953
Likes: 0
From: Belgrade, Montana
The EZ works fine and some are using it but only on level 1. I guess I assumed he was talking about the Juice as he didn't say which one he was using. Doesn't take a rocket scientist to figure out a MAP switch and a fuel pressure switch are just simple voltage and if they look the same and have the same connector then they probably are the same..
Reply
Old Sep 15, 2006 | 07:18 PM
  #9  
swansong04's Avatar
Registered User
 
Joined: Aug 2004
Posts: 420
Likes: 0
From: FRASER VALLEY B.C.
Originally Posted by MX429
Soemthing smells like........a troll.
yup ! i would say so !!!
Reply
Old Sep 15, 2006 | 09:22 PM
  #10  
duallydave's Avatar
Registered User
 
Joined: Jan 2005
Posts: 1,226
Likes: 0
From: vernon b.c. canada
he was probaly refering to the overhead reading,some boxes will cause it to be very inacurate so hes thinking hes getting 33mpgs but only actually getting 20.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
cLAYH
3rd Gen High Performance and Accessories (5.9L Only)
6
Jun 12, 2014 08:11 AM
jdanruby
3rd Gen High Performance and Accessories (5.9L Only)
3
Jan 12, 2010 12:56 AM
whitepowertruck
3rd Gen High Performance and Accessories (5.9L Only)
8
Nov 11, 2007 08:13 PM
eightball
3rd Gen Engine and Drivetrain -> 2003-2007
2
Aug 23, 2005 09:45 AM


Thread Tools
Search this Thread

All times are GMT -5. The time now is 09:06 AM.