Dodge Diesel - Diesel Truck Resource Forums

Dodge Diesel - Diesel Truck Resource Forums (https://www.dieseltruckresource.com/forums/)

- 3rd Gen Engine and Drivetrain -> 2007 and up (https://www.dieseltruckresource.com/forums/3rd-gen-engine-drivetrain-2007-up-114/)

- - Another 2008 4500... (https://www.dieseltruckresource.com/forums/3rd-gen-engine-drivetrain-2007-up-114/another-2008-4500-a-136159/)

grantx5

Feb 8, 2007 12:23 PM

Another 2008 4500...

http://www.dodge.com/en/08chassis_ca...P=AFC-Autoshow

steelblitzkrieg

Feb 8, 2007 02:21 PM

Can you buy a CC and then put a regular Dodge PU bed on it?

I would think yes, but not sure since they always mention all components are below frame level?

jrsmokestacks

Feb 8, 2007 02:39 PM

You'd have a gap. The cab to axle is too long for a 8' bed. Up till now even all the f-450/550's w/pu beds on them have gap fillers.

MCummings

Feb 8, 2007 04:50 PM

Not a bolt on fit with the pickup bed.

The frames of the regular 2500/3500 trucks are very different (width length, and mounting height and positions) than the C&C's, and 45/55 100's.

Merrick

PowerstrokeThis

Feb 13, 2007 07:11 PM

the shortest bed on the 5500 and 4500 is a 9ft bed.

All times are GMT -5. The time now is 09:21 AM.