I found this 17mm hex wrench at Sears: http://www.sears.com/sr/javasr/produ...id=00946666000

Now I'm looking for a socket hex wrench.

 

Rossn, my xfer case took something like 2.5 quarts, I wonder if its a typo in the manual.

But $50 bucks for a 17mm wrench?? whew!! Talk about robbery; or gold plated. If I had a bolt with a 17mm head lying around I would have used that myself, but ended up doing an internet search on "17mm hex" and found some available for about $4. Shipping was like $4 bucks too. Its another tool I'll probably only use 2 or 3 times in my life. Sears prob has them too.

 

bulabula,

2.5 quarts is 5-6 pts.....same as mine, almost 3 quarts to fill

It nooninsh and I'm done...Rear End was low...couldn't even get oil on my pinky..everything looked fine when I opened her up Took right at 4 quarts...
Frt End Cover a little harder to get at bolts (13mm) due to Frame cross beam, glad I had some universal sockets...Frt end oil level was right on from DC and took approx 3 quarts to fill.
Had to stop for a while and run daughter down the road . Otherwise would've been done sooner..

Oh, Oil Siphon at Autozone was $11.99. Boat place was alot higher...

Waiting for my Geno's pkg to arrive so I can change engine over...

Vehicle has 6870 miles on it.....

Next project...2" leveling kit with Bilstein shocks, if they ever release some for 04' models....

 

This is more like it. http://thetoolnetwork.com/1_2_dr_hex...rt_sf54_4.html