Needing to change fly wheel and all clutch assembly components! Not going to be pushing much more than stock horse power! Should I just go down to Auto Zone and get what they have or is there a preferred brand? I have been told to get away from the Dual Mass fly wheel! Any and all help will be appreciated!

 

Welcome to the group!

You should do some searching in the forums as there is a ton of info available. South Bend seems to be the clutch of choice here....and that is what I use too. Take a look in the DTR store and you will find what you need.

I wouldn't put AutoZone anything on my truck involving drivetrain. Maybe wipers, wax, or light bulbs......no clutches for sure.

These are serious work machines and they demand quality parts to stay reliable.

 

x2 the southbend kit has a solid flywheel and a real pilot bearing, non slip clutch and new hydraulics. when you get the dmf out on the floor it will suprise you that piece of junk lasted as long as it did.