Drilling hole in tranny pan BEFORE dropping
#46
There is no G. There is no G. Repeat after me, THERE IS NO G!
Thread Starter
It is kinda scary huh? lol
Mine's been fine, no leaks. (Of course I welded it but no leaks from the bolt & o-ring either). I did another fluid and filter change last year. It made life easy. Drained enough oil out that the pan was very easy to bring down.
Keep an eye on it to make sure it's fine but you'll eventually forget it.
Mine's been fine, no leaks. (Of course I welded it but no leaks from the bolt & o-ring either). I did another fluid and filter change last year. It made life easy. Drained enough oil out that the pan was very easy to bring down.
Keep an eye on it to make sure it's fine but you'll eventually forget it.
Thread
Thread Starter
Forum
Replies
Last Post
baddodges
3rd Gen High Performance and Accessories (6.7L Only)
4
02-09-2012 01:57 PM
tndiesel
3rd Gen Engine and Drivetrain -> 2003-2007
4
07-15-2011 11:36 AM
pwrtripls1
1st Gen. Ram - All Topics
11
03-04-2006 05:03 PM
Flatty
Performance and Accessories 2nd gen only
4
04-26-2005 02:19 PM