Dodge Diesel - Diesel Truck Resource Forums

Dodge Diesel - Diesel Truck Resource Forums (https://www.dieseltruckresource.com/forums/)
-   3rd Gen Engine and Drivetrain -> 2003-2007 (https://www.dieseltruckresource.com/forums/3rd-gen-engine-drivetrain-2003-2007-102/)
-   -   Any write-ups on changing '03 fuel filters? (https://www.dieseltruckresource.com/forums/3rd-gen-engine-drivetrain-2003-2007-102/any-write-ups-changing-03-fuel-filters-31789/)

Commatoze 09-22-2003 10:51 AM

Re:Any write-ups on changing '03 fuel filters?
 
[quote author=silver_goat link=board=20;threadid=19712;start=0#msg185925 date=1063814395]
............I do not drain the filter housing. Not sure if that is a bad thing or not...............[/quote]

I do the same thing, but I don't think it's the ideal thing to do. When you pull the filter you have all of the "washdown" from the draining filter mixing with the filtered fuel. I'm on my 3rd filter doing it that way, and I've experienced no ill-effects.

silver_goat 09-22-2003 03:13 PM

Re:Any write-ups on changing '03 fuel filters?
 
I am with ya Commatoze. :D I have not changed my filter on my new 03 ( on 4k on her) but on my 02 I would put the new filter in place and them let it sit for a while. Them I would drain a small amount of fuel out of the housing to drain anything that may have fallen into it. I probably over due the fuel filter bit because I change it about every 9.5 to 10 K. Probably over Kill. It is best to probably drain and clean the housing if you have the time and do not mind the hassle.


phox_mulder 09-22-2003 05:11 PM

Re:Any write-ups on changing '03 fuel filters?
 
My first change on my '02 was that black, if not blacker.
Changed at 10,000 miles.

2nd change, at 20,000 miles was just a medium/dark gray.

5,000 to go for the 3rd change, expecting it to be the same shade as the 2nd, if not a little lighter.


phox

Mark Thomas 09-29-2003 08:52 PM

Re:Any write-ups on changing '03 fuel filters?
 
I change mine every 6k, good preventative maint. imho.

Lightman 10-01-2003 10:57 PM

Re:Any write-ups on changing '03 fuel filters?
 
what is this 1 and 1/8" socket you guys are talking about? Maybe I have one and am just not visualizing what it is...?

Hoss 10-02-2003 11:27 AM

Re:Any write-ups on changing '03 fuel filters?
 
A little cylinder shaped device that is hollowed out in such a manner that it will accept the head of a nut (or bolt). This device then attaches to a ratchet to provide the needed torque to loosen (or tighten) the bolt (or nut). Specifically, a 1-1/8" socket is a socket designed to accept a bolt or nut with a 1-1/8" head. ;)

Lightman 10-02-2003 12:36 PM

Re:Any write-ups on changing '03 fuel filters?
 
See hoss I told you I could provide stupid questions [laugh] I think thats a large socket eh? I don't know that I have any that large.

Hoss 10-02-2003 12:40 PM

Re:Any write-ups on changing '03 fuel filters?
 
[laugh] I don't know that I do either. I also don't know why it's needed. I don't recall seeing any kind of nut on top of the canister. This is one of those things where a picture would speak a thousand words.... ;)

Lightman 10-02-2003 12:48 PM

Re:Any write-ups on changing '03 fuel filters?
 
[laugh] LOL so you don't even know if thats what's needed! Come on Hoss, you sounded like you knew what you were talking about ;) Yes, could someone please take a pic or two of the fuel filter top and how to remove it? I'm sure its easy once you're looking at it, but seeing my truck is STILL in D1 status :'( I haven't had that luxury!

Hoss 10-02-2003 12:54 PM

Re:Any write-ups on changing '03 fuel filters?
 
Hehehe....I haven't changed my filter yet. ;D Haven't even looked at how to change it. I do think I know where it is though. ;D [laugh]

tobyw 10-02-2003 01:51 PM

Re:Any write-ups on changing '03 fuel filters?
 
I won't say you NEED the 1-1/8" socket, but it sure makes it easy... The canister lid has the 1-1/8" hex head molded into it, and if you've got the socket, it makes spinning it off and on a breeze.

Lightman 10-02-2003 01:52 PM

Re:Any write-ups on changing '03 fuel filters?
 
How big is the cannister, could you use a strap wrench to loosen it?

Lightman 10-02-2003 01:56 PM

Re:Any write-ups on changing '03 fuel filters?
 
Oh well, I just ordered one, it was only a couple bux.

http://www.toolking.com/performance/view.asp?id=1433

Hoss 10-02-2003 02:11 PM

Re:Any write-ups on changing '03 fuel filters?
 
Okay...but what about RobG's comments below?? I thought using a socket would crack the lid??

[quote author=RobG link=board=20;threadid=19712;start=0#msg185101 date=1063677773]
It's no different from the '98-02 trucks. Remove the plastic cover from the filter housing (be careful, using a socket won't work, it just cracks it), remove the old filter[/quote]

Hoss 10-02-2003 02:18 PM

Re:Any write-ups on changing '03 fuel filters?
 
[quote author=Lightman link=board=20;threadid=19712;start=15#msg191934 date=1065121016]
Oh well, I just ordered one, it was only a couple bux.

http://www.toolking.com/performance/view.asp?id=1433
[/quote]

By the way, the 1-1/8" socket will not work for the 2004 model trucks. For that one you will need a 1-3/4" deep socket with two 90 degree adaptors, a 6" extension and a 12" extension.


All times are GMT -5. The time now is 09:53 PM.


© 2024 MH Sub I, LLC dba Internet Brands