3rd Gen Engine and Drivetrain -> 2003-2007 5.9 liter Engine and drivetrain discussion only. PLEASE, NO HIGH PERFORMANCE DISCUSSION!

3rd Gen with 300,000 mi.

Old Jan 31, 2012 | 02:18 AM
  #1  
deanhinsley1963's Avatar
Thread Starter
Registered User
 
Joined: May 2009
Posts: 471
Likes: 0
From: Hugo,ok.
Question 3rd Gen with 300,000 mi.

Hi guys Im a 1st Genner but have been looking at a 04 2wd Dually with a auto trans and the 5.9 cr. It has 300k on it and I guess my biggest question is the cr as reliable at this mileage as the old 12 valve?
Reply
Old Jan 31, 2012 | 05:32 AM
  #2  
6spd05Dually's Avatar
Registered User
 
Joined: May 2009
Posts: 236
Likes: 0
From: San Antonio, TX
Originally Posted by deanhinsley1963
Hi guys Im a 1st Genner but have been looking at a 04 2wd Dually with a auto trans and the 5.9 cr. It has 300k on it and I guess my biggest question is the cr as reliable at this mileage as the old 12 valve?
Dean, I can answer your question. I have an 05 3500 4x4 dually 6spd. The truck has 275,000+ miles now. The only thing I have done is replaced 1 clutch @ 199k miles, and put a crank seal w/wear sleeve on the front and rear crankshaft and replaced some cheap gaskets. I had pulled my camshaft out and didn't have one scratch or nick on it. The injectors have never been replaced. The truck was bought new. In addition, I pull a 53' gooseneck in my business also. These trucks will last a long time if driven the way a diesel should be without all the power tunes. The Cummins engineers knew what they were doing when designing this motor. One last thing, empty I get 20 mpg @ 65mph. Hope this helps!
Reply
Old Jan 31, 2012 | 07:59 AM
  #3  
jhenson's Avatar
"How in the heck do I change the phrase in between my user name and avatar?"
 
Joined: Oct 2008
Posts: 1,742
Likes: 0
From: Waco, Texas
Honestly, if the truck is maintained properly it should last an easy 500k!!! My '03 has right at 300k on it and the only parts I've had to replace was the clutch and CP3. Factory injectors are still in it as well. Yes, I do have several aftermarket, power adding, goodies on it but maintenance is the key!!
Reply
Old Jan 31, 2012 | 08:10 AM
  #4  
dezeldog's Avatar
Registered User
 
Joined: Jul 2004
Posts: 506
Likes: 0
From: the mitten
X3 with the above. I'm at 328k now with everything stock....cp3 and injectors and even the batteries. I have replaced a couple water pumps and a couple lift pumps and 1 apps from Timbo. Had the trans done @ 220k and ball joints @ the same time and that about covers it. I don't pull anything much over 6k and she is really happy when working.....HTH

Jim
Reply
Old Feb 1, 2012 | 12:34 AM
  #5  
cdennyb's Avatar
Registered User
 
Joined: Jan 2007
Posts: 719
Likes: 0
From: In Oroville, Ca., same house for past 46 yrs!
My '03 is at 218,000 and yesterday i changed the upper radiator hose and serpentine belt for the first time. on my second set of brakes and tires and rebuilt the trans at 140,000... still running strong and I'd have no problem buying another one with miles on it. Oh, I started getting great mileage after it passed the 70,000 mile mark. It still gets over 20 empty down the freeway with cruise control on.
Check the fluids, maybe do an oil analysis if you can and look over the maint records if there is any. You can tell a lot about a trucks future from it's past.
Reply
Old Feb 1, 2012 | 07:21 AM
  #6  
madhat's Avatar
Administrator/Jarhead
15 Year Member
Liked
 
Joined: Jun 2006
Posts: 14,971
Likes: 19
From: Jonesborough, TN
I also agree. As long as the truck was taken care of, you should not have a problem other than normal wear and tear.

The auto might need some work, ask if it has been rebuilt.
Reply
Old Feb 1, 2012 | 10:37 AM
  #7  
jhenson's Avatar
"How in the heck do I change the phrase in between my user name and avatar?"
 
Joined: Oct 2008
Posts: 1,742
Likes: 0
From: Waco, Texas
cdennyb...."you can tell a lot about a trucks future by looking at it's past".....
pretty well sums it up right there .
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
doursler
Performance and Accessories 2nd gen only
2
Mar 15, 2007 04:44 PM
Hillbilly_Deluxe
Other
22
Nov 1, 2006 09:09 AM
eb290
3rd Generation Ram - Non Drivetrain - All Years
14
May 30, 2006 12:51 PM
DRM
12 Valve Engine and Drivetrain
5
Aug 11, 2005 09:34 AM
BigBlackDodge
Other
4
Jan 9, 2003 05:45 PM


Thread Tools
Search this Thread

All times are GMT -5. The time now is 02:43 AM.