3.73 or 4.10's ????
Thread Starter
Registered User
Joined: Oct 2006
Posts: 294
Likes: 0
From: Great State of Georgia
3.73 or 4.10's ????
Where does it say what gears are in these trucks and what rpm should I be running @ 70 mph on an 07 with a 6spd???
Think the dealer took me for a little RIDE!
Think the dealer took me for a little RIDE!
Registered User
Joined: Apr 2006
Posts: 5,777
Likes: 0
From: Alta Loma, CA
Registered User
Joined: Sep 2006
Posts: 30
Likes: 0
x2 at 70 im just over 2 grand...something like 2150-2250 at 80 im right at 2500. if we had 4.10s you could kiss unloaded interstate driving byebye, as well as decent fuel milage. I measured my stock rubber mounted at 31in tall. I'm looking to jump up to around 33's to drop my rpm a little.
Registered User
Joined: Jul 2006
Posts: 3
Likes: 0
[QUOTE]=ne14jpn;1191321]x2 at 70 im just over 2 grand...something like 2150-2250 at 80 im right at 2500. if we had 4.10s you could kiss unloaded interstate driving byebye, as well as decent fuel milage. [QUOTE]
Just picked up a `06 3500 CTD Quad cab shortbed with automatic and 4:10 rearend.At 60mph it turns about 1850(?)I`ll double check it.What`s your opinon on unloaded interstate driving with my set-up?Sorry to hijack your thread.
Just picked up a `06 3500 CTD Quad cab shortbed with automatic and 4:10 rearend.At 60mph it turns about 1850(?)I`ll double check it.What`s your opinon on unloaded interstate driving with my set-up?Sorry to hijack your thread.
Trending Topics
Registered User
Joined: Oct 2006
Posts: 58
Likes: 0
Why
Registered User
Joined: Apr 2006
Posts: 5,777
Likes: 0
From: Alta Loma, CA
Nothing wrong with it, but you can only get a 6-speed with 3.73's from the factory. Once you get it you can put 4.56's in there if you want. But the 6-speed is geared so low you wouldn't want anything lower than 3.73s. Most people are hoping to get 3.55's for their 6-speed.
Registered User
Joined: Sep 2004
Posts: 308
Likes: 0
From: north