03 power loss
03 power loss
Hello all. Am new to this site but have been reading alot on here and like it alot. My 03 3500 has a problem. When I floor it at any speed it will start to take off then completely loose power (not die) then if I let off it runs fine. It seems to run fine the rest of the time also. I replaced the fuel filter and the lift pump thinking that might be it but it didn't help. Also puzzling is that no codes show up on the scan tool either. Anybody else have this problem that was figured out. I have been told it might be the throttle position sensor but I hate to spend over $500.00 if thats not the problem. Any help?
Thanks Dean
Thanks Dean
Thanks for the reply. I did try the codes and nothing showed up. I feel kind of dumb because it ended up being a dirty air filter. It wasn't that old and looked clean but that's all it was. Lucky me.
Thread
Thread Starter
Forum
Replies
Last Post
RHC
3rd Gen Engine and Drivetrain -> 2003-2007
4
Aug 12, 2019 03:32 PM
Ranger 2/75
3rd Gen High Performance and Accessories (5.9L Only)
2
Mar 16, 2006 05:07 PM



