2003 3500 srw - $6000
2003 Ram 3500 2WD Single Rear Wheel NV5600. The truck currently has 378,000 miles on it. I believe it has a broken piston ring but am not certain. It's got blow by and is sending oil out the breather tube. It smokes for about 5-10 minutes after cranking it for the first time of the day but then the smoke goes away and you'd never know there was something wrong. This just started a couple of months ago. I've owned the truck since 2005 and have driven it daily since then. I quit driving it when it started leaking. I've got an oil analysis from when the truck had 342,000 miles saying it looked great. I don't have the time or ambition to repair it. It's got a fair amount of modifications:
BD Diesel Killer B Turbo - 63/65/14 - Installed 10/11 60 HP Industrial Injection Injectors - Installed 9/11 New CP3 - Installed 9/11 SBC 3250 Street Double Disc Clutch - Installed 8/13 South Bend Clutch Hydraulics Glacier Diesel Fuel System with Walbro 392 Pump BD Short Shifter Kit Isspro EV Gauges Firestone Air Bags with on board compressor - Gauge and switch in dash Flex A Lite Electric Fans MBRP 4" Exhaust S&B Air Intake Backwoods Deluxe Rear Bumper - Installed 10/12 2.5" Front Leveling Kit with Bilstein Shocks 305/70/17 Nitto Terra Grappers with 50% + left Bully Dog Power Pup Programmer Quad Xzillaraider II New Batteries 10/12 Kenwood Head Unit with front aux and USB input Black Toolbox The interior is very clean and shows minimal wear. There aren't any tears in the seat and everything works with the exception of one of the map lights. The 6th gear synchronizer is worn but otherwise the truck drives out fine. I've always ran Rotella in the motor and high end synthetics in the transmission and rear end. The past few times I've changed them I've used Amsoil. I've always been meticulous about the mechanicals on the truck and always upgraded with something better than stock. The body has it's fair share of dings, dents and scratches and the clearcoat is peeling in spots but still presents itself well. This truck was never used to pull heavy or commercially, just commuting and the occasional trailer. I'm asking $6000 OBO as it sits. Not interested in parting out or trades. PM me if you're interested http://i1358.photobucket.com/albums/...psd3f8a8d7.jpg http://i1358.photobucket.com/albums/...ps13b578ae.jpg http://i1358.photobucket.com/albums/...ps821c53a7.jpg http://i1358.photobucket.com/albums/...ps095d1a54.jpg http://i1358.photobucket.com/albums/...ps8230250a.jpg http://i1358.photobucket.com/albums/...ps374a7fdd.jpg |
I've moved the pictures around on my Photobucket account and took a bunch more. Here's the new link - 2003 Dodge 3500 Photos by LeoneSM | Photobucket
I can't edit the above post for some reason. |
Originally Posted by leonesm
(Post 3267528)
I can't edit the above post for some reason. |
Makes sense. I just figured I was missing something!
|
All times are GMT -5. The time now is 06:09 PM. |
© 2024 MH Sub I, LLC dba Internet Brands