2nd Gen. Dodge Ram - No Drivetrain Discussion for all Dodge Rams from 1994 through 2002. Please, no engine or drivetrain discussion.

Rear turn signal not working

Thread Tools
 
Search this Thread
 
Old 01-16-2006, 12:35 AM
  #1  
Registered User
Thread Starter
 
Stormin_Norman's Avatar
 
Join Date: Aug 2002
Location: Montana
Posts: 191
Likes: 0
Received 0 Likes on 0 Posts
Rear turn signal not working

My right rear brake and turn signal is out. I replaced the bulb and flasher unit without any luck. I checked power at the bulb and trailer connector, and no power. I disconnected the wiring at the connector under the cab and still no power. I would think it's the turn signal switch, but the front right is still working . Does anyone know if the switch has four wires (front right, front left, rear right, rear left)? I would have figured the front and rear turn signal share the same wire from the switch? The flasher is a five prong, so I guess it's possible. I'm hoping it's not a loose wire in that giant bundle coming out of the fuse block.

Thanks
Norm
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Chooey
2nd Gen. Dodge Ram - No Drivetrain
2
06-21-2014 04:49 PM
Gliderguy
3rd Gen Engine and Drivetrain -> 2003-2007
4
03-27-2011 09:38 PM
klx300guy8
3rd Generation Ram - Non Drivetrain - All Years
23
02-20-2008 01:53 PM
hazema
3rd Generation Ram - Non Drivetrain - All Years
1
11-08-2007 09:11 AM
CruisingRam
2nd Gen. Dodge Ram - No Drivetrain
1
09-14-2004 04:50 AM



Quick Reply: Rear turn signal not working



All times are GMT -5. The time now is 01:56 PM.