heated tow mirrors

Reply Subscribe

Thread Tools

Search this Thread

Oct 19, 2007 | 05:20 AM

#16

Moose10

Registered User

Joined: Feb 2004

Posts: 1,071

Likes: 0

From: Chaffee, NY

Quote:

Originally Posted by mopar-or-no-car

hey kurtaing I was reading through some old post about this and you said that uo need third gen mirrors that are from 02-04 but all I can find on ebay is 02-06 mirrors will theses fit or are they just a touch different? http://cgi.ebay.com/ebaymotors/Dodge...spagenameZWDVW

Yes, those are the "heads" or mirror portion that you need. Then you'll need the base plate (part that bolts to the truck) and the arms from a 2nd gen and make one set out of the two.

Oct 19, 2007 | 12:48 PM

#17

SIXSLUG

Registered User

Joined: May 2006

Posts: 5,614

Likes: 167

From: Pacific NW, B'ham, Kalispell MT

I believe you need the power/heated heads from an 03-05 and the lower arms from an 98-02 2500. The 02 1500 were the new body(3rd gen) while the 02 2500/3500 were the 2nd gen. If I remember correctly the 06 and up have a different mirror head shape regarding the attachment at the arm.

Oct 19, 2007 | 08:54 PM

#18

mopar-or-no-car

Thread Starter

Registered User

Joined: Dec 2006

Posts: 742

Likes: 0

From: Surrey BC

ok well they say they go on 02-06 Ill buy them and hope they fit i cant find any that say they go on 03-05 thanks for the reply

Oct 21, 2007 | 12:40 PM

#19

SIXSLUG

Registered User

Joined: May 2006

Posts: 5,614

Likes: 167

From: Pacific NW, B'ham, Kalispell MT

I looked at an 07 yesterday and they are definitely different now. I can't really tell the diferences between the 03-06 models, but many I have seen seem to be the same as mine as far as the mirror head shape is concerned. Just the mounting bracket is different to accomodate the 3rd gen body. I am sending you the TDR page from a guy who did the conversion quite easily. I hope it works for you. Kurt