redramnc

I know somebody else has run into this before so, after much searching, I am gonna ask - what options are there for replacement front springs for a 2WD QC SB 12V diesel with auto and AC?

If one believes the interweb application listing(s) then the Moog 7394 is for a regular cab short bed non-AC truck, yet it has the correct length, coils, and spring rate for a diesel, as far as I can tell.

If I remember correctly (BIG IF) I used 7394s on my 96 regular cab diesel auto and have put about 100K miles on them without issue. I talked to Coil Spring Specialties briefly but did not have the spring info they needed to custom wind me a set to my liking, which may be what I end up doing.

Anybody have an off-the-shelf recommendation? I already have the ball joints so if I am gonna be in there..............

KATOOM

This is all I have on front springs. http://dodgeram.org/tech/specs/springs.htm