'98 12v PCM-Bus link issues
#1
Registered User
Thread Starter
Join Date: Apr 2004
Location: TEXAS
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
'98 12v PCM-Bus link issues
I have a '98 12v. I've lost all PCM controlled functions. Scanners say "12 volt power loss" or "modules not responding". After $155.00 the dealer don't know rear from hole in wall. All lines in to PCM have 12v+ at right spots and grounds are OK. All sensors have 5 volts. I've had 2 PCM's in and a diffrent instrument cluster and no change. Any thoughts? Thanks.
Thread
Thread Starter
Forum
Replies
Last Post
frwinks
3rd Gen Engine and Drivetrain -> 2003-2007
3
01-11-2014 06:58 PM
Puzman
24 Valve Engine and Drivetrain
2
09-30-2007 10:57 PM