halfpint23

Trying to get the last bits and pieces done of completely overhauling the front end of the truck in the signature line. Ordered in Energy Suspension kit for the sway bar brackets and end links - what showed up was the kit for a 32mm TWO wheel drive truck. The kit included end links, long and straight. I have asked about returning it, but they want it returned by a method that included tracking info to make sure their warehouse accepts it - of course this means I will be out shipping for BOTH ways.... darn near the cost of the kit. If anyone needs this kit, please give me a holler! I'll send it to you for my cost, brand new, uninstalled ungreased (it does have grease fittings).

Next issue - have ordered in new end links (now knowing they do NOT come in any kits for the 4x4), and measured the sway bar. ALL suppliers state selection for either 30mm or 32mm bar - mine measures sub-30 every place I put a micrometer on it. It's like 29.6 or so to 29.8mm. Can I safely assume that this is really the 30mm bar? It appears to be stock...

Man am I tired of chasing parts.

zthatzmanz28

Mine measured just shy of 32 mm (31.7) I went with the 32 mm (1 1/4 inch) size and it fit. They had a 31.5 mm but I elected to round up.