easier cold start with ETH?
easier cold start with ETH?
Correct me fella's if I am wrong, but logically this would make sence right? If the ETC has a compression ratio of 16.3:1 and the ETH has a compression ratio of 17:1 that would make the ETH have an easier cold start right?
Here is my logic....higher compression=more heat since we all know how our engines run, more heat at start up makes it easier for that diesel fuel to ignite. correct?
keep in mind this if you were not to have the aid of the grid heater. I guess it should have the same affect if you were to use the grid heater....just at a lower temp.
Here is my logic....higher compression=more heat since we all know how our engines run, more heat at start up makes it easier for that diesel fuel to ignite. correct?
keep in mind this if you were not to have the aid of the grid heater. I guess it should have the same affect if you were to use the grid heater....just at a lower temp.
Thread
Thread Starter
Forum
Replies
Last Post
bgilbert
1st Gen. Ram - All Topics
7
Jan 7, 2006 09:21 PM
Rockyhud
12 Valve Engine and Drivetrain
3
Oct 8, 2004 09:29 AM
Crabjoe
3rd Gen Engine and Drivetrain -> 2003-2007
10
Jan 11, 2004 08:21 PM



