I'm looking to buy the warn locking hubs for my 91 W250 4500lb axle. Is this assembly seperate from the wheel bearing? I believe I have a bad bearing because I have play in the shaft. If so where do I get the wheel bearing kit for both sides?



Also here is the link to the warn locking hubs;

http://www.warn.com/truck/hubs/hub_service_parts.shtml

 

I don't think that the 4X4 locking hub has anything to do with play there, if I understand you right. There is a bearing in the spindle that may account for it, here is a place that you can see it, good luck...Mark P.S. It is QU40149

 

http://www.flickr.com/photos/63170901@N03/5759789859/http://www.flickr.com/photos/63170901@N03/5759789859/ by http://www.flickr.com/people/63170901@N03/, on Flickr

Here is a pic...Mark

 

That's what I'm thinking. Thanks alot! I'm also going to see if I can just get new bearings from quad 4x4 as well.

 

isn't that called a spindle bearing?

 

I wouldn't know, that's why I posted a pic , I do know that it's a needle bearing though...Mark

 

That pic is the spindle bearing, its for holding the axle shaft centered on one end and the hub spline holds it on the outboard end.