cougar

Looking for companies that actually rebuild VE pumps, not distributors. I did a search and most of the information is rather old.
My pump has finally reached the point it may leave me stranded somewhere, so time for a rebuild. I could live with a stock overhaul, but would like something better tuned toward towing by someone that has the parts and equipment. I can do the typical basics, but internal mods or special parts are outside of my barnyard expertise.
Tell me who's out there.

Jim5870

There is a place near me here in Ontario called Chatham Fuel Injection. Been in business forever, had them do my pump. Maybe might be a good choice since your US dollar is worth 30% extra in Canada.

edwinsmith

I got my VE from these guys. It has been fine and I haven't had any problems at all.

US Diesel Parts - Diesel Performance Parts For Dodge, Ford & Chevy

cougar

$1500 core charge? No way The 230hp pump they offer comes from Sheid. Buying it direct they only charge a $300 core. And AK is of course excluded from "free" shipping by everyone.
Sheid has a good reputation and the core charge makes them most inviting.

1972RedNeck

I personally wouldn't let them oil the chain on my bicycle. Maybe they have gotten better, but a couple years ago they told me I "couldn't get 250HP out of a VE pump"...

edwinsmith

Well, the Pump is the only thing I have bought from them. About 4 years ago the core charge was $500. Maybe the VE cores have gotten a lot more scarce.

Edwin

patdaly

I am much closer than you, but I will send mine to Sheid when I pull it for a refresh.

And I have a couple of good rebuilders in this area, to me, their reputation will be worth the few extra bucks.

loudhornsrule

I pulled my VE , and sent it to Metro Fuel In Dallas. They rebuilt it, and shipped it back to me. Good people and good service. That was 3 years ago, and no complaints here. Good Luck

Angry Johnny

There are many independent diesel shops that rebuild them along with injectors and turbos. I would believe any of the Cummins dealers would be an authorized Bosch rebuilder as well and would rebuild it to factory specs. Some even do mods to them too.

https://www.manta.com/c/mm2wvyc/cummins-northwest

cougar

My thoughts are, if I have to ship it out I might as well go for the bells and whistles. Shipping is going to be the same regardless. Cummins NW here in Anchorage either ships them out somewhere or has the local Bosch shop do it. I wish I had a garage, or at least a clean solid surface to work on and be able to block the wind. Health issues aren't helping.

kensmachine

Most Cummins shops don't have rebuild shops in them any more. mother Cummins wants to sell there rebuilds. At one time Cummins NW in Portland Or. had a full shop that did it all crank grinding, rod rebuilding,block and head rebuilding,turbos, fuel systems but they only did the Cummins PT systems. Ken

ofelas

Giles Gallie in Canada or Seth Farrell in the US.

Mark Wilson at DieselTuff.com offers both custom options at a great price, and will guide you with getting a pump built for your exact needs/budget.

cougar

Whelp, I ordered an injection pump and piston lift pump. Both should be here end of next week.

ofelas

Jim Lane

Becs Pacific,
A Holset and Bosch shop,
I get all of my Bosch parts from them.