Under dash wire holder
#1
Registered User
Thread Starter
Under dash wire holder
I forgot to take a picture of exactly where and which orientation this goes. Had my whole dash apart to fix gremlins and had to take it off. Anybody have a picture? It doesn't have to go back in but it does help keep wires from straying into the park brake ratchet...I did not take any screws out of it so that is partly why I'm not sure where it goes. The wires were held into it with factory zip ties is all I remember.
#2
Registered User
I stuck my head under the dash and it looks like that part covers the harness right next to the head light switch. That little hole was facing down to the floor. This was in my '93.
Thread
Thread Starter
Forum
Replies
Last Post
NJMurvin
3rd Generation Ram - Non Drivetrain - All Years
4
01-14-2010 07:59 PM
adventuris
3rd Generation Ram - Non Drivetrain - All Years
3
03-01-2008 04:31 PM
LanceK
3rd Gen High Performance and Accessories (5.9L Only)
7
11-29-2006 09:26 PM
KATOOM
2nd Gen. Dodge Ram - No Drivetrain
8
04-23-2003 06:53 PM
TPilaske
Performance and Accessories 2nd gen only
16
11-22-2002 08:15 PM