turbo
Registered User
Joined: May 2005
Posts: 1,060
Likes: 1
From: Peoria, IL
http://www.dodgeram.org/tech/dsl/FAQ/turbo_faq.htm
HX35 has 56mm compressor (until sometime around 2000) , map width enhancement, and 12cm wastegated housing. The ones that came from 12v trucks will bolt up in place of the H1C.
The H1C has either a 50mm (baby H1C on non-IC trucks) or 54mm compressor (IC trucks) without map width enhancement and either a 21 or 18cm non-wastegated housing.
HX35 has 56mm compressor (until sometime around 2000) , map width enhancement, and 12cm wastegated housing. The ones that came from 12v trucks will bolt up in place of the H1C.
The H1C has either a 50mm (baby H1C on non-IC trucks) or 54mm compressor (IC trucks) without map width enhancement and either a 21 or 18cm non-wastegated housing.
Thread
Thread Starter
Forum
Replies
Last Post
j
Performance and Accessories 2nd gen only
5
Jan 9, 2004 08:19 AM
Haulin_in_Dixie
Performance and Accessories 2nd gen only
12
Jul 21, 2003 11:14 AM
redram
Performance and Accessories 2nd gen only
9
Dec 10, 2002 09:54 AM