I moved my crankcase vent hose back about 6' towards the rear and what a difference on the underside components. Super clean w/o any of the fine oil mist all over the stuff. 5/8" heater hose coupling, clamps, a few zip ties, and 6' of oil resistant hose and your done. Very simple.

 

That's my rust prevention system.

 

Mines the leaky RMS

Michael

 

whats you get the tranny out of the way, taht thing is easy to replace...

 

exactly. Truck doesn't have a spot of rust between the frame rails. Maybe I need to relocate it outside of the frame next.