OK guys-

I read one person saying a GENII bar went on the truck. Does anyone know the different diameter of bars between Cummings, V6, and V8 options?? I only saw a 96' V6 bar in the HUGE junkyard Saturday. It looks pretty beefy maybe 1.25 inches in diameter(didn't have calipers handy).
I had scrounging- so I'll try and go to a Dodge junkyard- I figure it's worth about $75-100 to me. Just need to know what parts are needed... and make sure I get the right diameter sway bar. I can just hear them- heck yea this came off a 97 D250 with the Cummins.
They didn't have any Alcoa rims off Ford conversion vans either=0(

Michael

 

Come on- some one knows sizes.. options

 

frnt or rear.

I put a stock front one on mine I found on a c and c truck. It works great.

 

i recently had custom bars bent up for $215 a piece.

 

I put one on mine, but it was no trivial task - all custom fabbed mounts and bracketry:

http://stuff.is-a-geek.net/PhotoAlbu...cs/CDT_160.jpg
http://stuff.is-a-geek.net/PhotoAlbu...ics/CDT_25.jpg
http://stuff.is-a-geek.net/PhotoAlbu...ics/CDT_26.jpg
http://stuff.is-a-geek.net/PhotoAlbu...ics/CDT_27.jpg