I see through searching "steering stabilizers" that this subject has been covered before. But I have not seen what applies to my rig. I have a 1993
D250 two wheel drive. Has anyone installed a steering stabilizer on a two wheel Dodge diesel 1st gen. I tried a Rancho with factory mount brackets and the clearance between the shock and the massive oil pan was minimal.

Any other brands that readers have tried with success.

Thanks

 

I gave up on this one but would be interested if anyone has a source.
Bob

 

I will be installing a skyjacker dual, sometime over the next week. I will let you all know how it goes.

looks pretty straight forward. shock mounting plate clamps to front axel in middle, then shock run out either direction and bracket clamps to the tie rod.

 

I see where skyjacker has a nice unit for the W-250, but list nothing for the
D-250. Pro-comp list one for the two wheel drive but I am wondering if I would have the same clearance problems I had with the Rancho. Rough-Country is one of the few who says "except diesels" on their two wheel aplication chart.

 

Your sig shows you've got a W250 - the parts wont work on a D250 (2 wheel dr).

Bob