Steering Box Mounting and other Questions
#16
Registered User
Thread Starter
When you go crossover you move the box back to the 2wd position and throw the plate in the garbage
This is great news!!! "back to the 2wd position" meaning... up against the frame no plate? If so how sweet is that! Sandwiching that mounting plate with the box and frame in the past was a pain in the Good riddance! Out on a road trip with the anxiety of that thing breaking pulling into a parking place possibly over.
This is great news!!! "back to the 2wd position" meaning... up against the frame no plate? If so how sweet is that! Sandwiching that mounting plate with the box and frame in the past was a pain in the Good riddance! Out on a road trip with the anxiety of that thing breaking pulling into a parking place possibly over.
The following users liked this post:
mknittle (02-26-2017)
#17
Registered User
Yes it bolts directly to the frame, the "2wd" holes are already in the frame. Pretty simple. You can also run that dodge connection steering brace after to if you like
Thread
Thread Starter
Forum
Replies
Last Post
RobG
3rd Generation Ram - Non Drivetrain - All Years
13
11-25-2013 12:53 PM
serious
1st Gen. Ram - All Topics
4
03-15-2006 04:26 PM