stack for hydraulic flat bed
#1
Registered User
Thread Starter
Join Date: Oct 2012
Location: lincoln ky
Posts: 13
Likes: 0
Received 0 Likes
on
0 Posts
stack for hydraulic flat bed
you guys have any good ideas for a exhaust stack for my hydraulic flat bed i was thinking of something removable that reattaches when i lower the bed but dont know exactly how to do it.
thanks
thanks
#2
Administrator
You can use exhaust bells like on Class-8 tractors, check out the stacks on any of the COE tractors on the road where the stacks are mounted to the cab.
BTW COE= cab over engine
Jim
BTW COE= cab over engine
Jim
#4
4" pipe that sticks up a couple inches above the floor and bolt a 6" stack to the bed so when it raises the 4" pulls out of the 6" stack and when you lower it it slides back over, with a 6" stack there should be enough flow that smoke doesn't push out the bottom side.
Thread
Thread Starter
Forum
Replies
Last Post
Mark Hodowanec
3rd Gen High Performance and Accessories (5.9L Only)
3
07-16-2006 04:05 PM
Mark Hodowanec
3rd Gen High Performance and Accessories (5.9L Only)
10
02-24-2006 04:22 PM