Putting in isspro ev2 gauges

Reply Subscribe

Thread Tools

Search this Thread

11-29-2018, 04:23 PM

Oldbull1997

Registered User

Thread Starter

Join Date: Feb 2017

Posts: 27

Likes: 0

Received 0 Likes on 0 Posts

Putting in isspro ev2 gauges

where should i wire my dimmer wire and ignition wire for my gauges?? And can i just run the ground wire to spot on the firewall??

Reply Like

11-29-2018, 04:56 PM

thrashingcows

Registered User

Join Date: Mar 2010

Location: Prince George, BC

Posts: 7,235

Likes: 2,112

Received 1,331 Likes on 862 Posts

I used a couple of those bladed fuse jump terminals off the back of the fuse panel, and I just run a ground to the dash frame somewhere.

Reply Like

11-29-2018, 05:03 PM

Oldbull1997

Registered User

Thread Starter

Join Date: Feb 2017

Posts: 27

Likes: 0

Received 0 Likes on 0 Posts

Quote:

Originally Posted by thrashingcows

I used a couple of those bladed fuse jump terminals off the back of the fuse panel, and I just run a ground to the dash frame somewhere.

how do these work??? Ive seen others use them, do i plug it in and then stick the fuse that was in that spot in this?? I always have that 1 amp fuse isspro gives you so where shouod i put that

Reply Like

11-29-2018, 07:20 PM

thrashingcows

Registered User

Join Date: Mar 2010

Location: Prince George, BC

Posts: 7,235

Likes: 2,112

Received 1,331 Likes on 862 Posts

Find the circuit you want to run a jump off of...lights, ignition...then plug this in where the old fuse used to be, install old fuse and a new one to match and then run this to your accessory. I like them because it doesn't butcher up your existing wiring.