PUmP AdJuStMeNt
lol, type fast, read later. i slow down and care when it comes to work related items, ( i work at Intel) other than that, its a free for all. lol, tomorrow = MORE POWER i hope. jiMMy
Dont worry about that smoke screw on top, I would put it back.
Pull that cover that has 4 screws in it and take the little line off. then pull out the diaphram and turn it about 120 degrees to the right.
What that does is give you more fuel on the top end.
When you pull that diaphram out, you will see a line on it. that is where the fuel pin is riding. you want that fuel pin on the lowest side of that ecentric cone.
If that isnt too clear than someone else chime in and explane how easy it is.
Good luck
Pull that cover that has 4 screws in it and take the little line off. then pull out the diaphram and turn it about 120 degrees to the right.
What that does is give you more fuel on the top end.
When you pull that diaphram out, you will see a line on it. that is where the fuel pin is riding. you want that fuel pin on the lowest side of that ecentric cone.
If that isnt too clear than someone else chime in and explane how easy it is.
Good luck
Thread
Thread Starter
Forum
Replies
Last Post
Lil Dog
Performance and Accessories 2nd gen only
1
Sep 12, 2006 04:31 PM
stillsmokin
1st Gen. Ram - All Topics
3
Sep 3, 2005 04:51 PM




