Part # for spring shackles rear of rear
#1
Part # for spring shackles rear of rear
Hey DTR I'm installing a 4 inch skyjacker lift kit on my truck and my rear shackle on the driver side is seized up and rusted so I need to cut it out and replace it
I called the dodge dealership near me in San Diego and they said its a part that is no longer manufactured because the vehicle is too old, its a 1992 W250 Cummins 3/4 ton which shocked me because I see a lot of the old trucks on the road.
I need rear of rear shackles on both sides.
Does anyone have a source for this part or a part # I can give to dodge in case they are looking up the wrong part for me. Thanks a lot guys.
I called the dodge dealership near me in San Diego and they said its a part that is no longer manufactured because the vehicle is too old, its a 1992 W250 Cummins 3/4 ton which shocked me because I see a lot of the old trucks on the road.
I need rear of rear shackles on both sides.
Does anyone have a source for this part or a part # I can give to dodge in case they are looking up the wrong part for me. Thanks a lot guys.
#2
Registered User
#4
Registered User
Seem to be as good as the stock ones.
#5
Registered User
I get mine from Stengel Bros, cheap and good quality. They have the 0.75" shackles too I believe.
330-184 DODGE STAMPED SHACKLE
I have two pairs of them in service for quite a few years with no issues.
Here it is:
330-185 DODGE STAMPED SHACKLE
Family owned company, good people to deal with in my experiences.
330-184 DODGE STAMPED SHACKLE
I have two pairs of them in service for quite a few years with no issues.
Here it is:
330-185 DODGE STAMPED SHACKLE
Family owned company, good people to deal with in my experiences.
The following users liked this post:
mknittle (09-27-2016)
Thread
Thread Starter
Forum
Replies
Last Post
kawi600
2nd Gen. Dodge Ram - No Drivetrain
1
07-24-2006 11:57 PM
1320
Performance and Accessories 2nd gen only
3
08-05-2003 12:04 AM