JC Whitney Ram Head Hood Ornament
JC Whitney Ram Head Hood Ornament
You know, the one with the eyes that light up in red. Has anyone installed one of these? I just got mine, but before I go drilling into the hood, I needed some input. Seems kinda goddy. Way bigger than OEM. Carmyne
How big is that? My OEM rams head is about 3 inches tall. Does yours have the spring base so it won't get broken off?
I wish I had known about those before I paid $45 for the OEM.
Edwin
I wish I had known about those before I paid $45 for the OEM.
Edwin
With shipping, JCW was the same price as OEM. The ornament is soild to the base; no flex whatsoever. The body of the JCW ram seems to have a longer neck with a more lean, muscular look and the horns have more detail to them. It is the base that mounts to the truck that is rather big; about 2" wide by 1 1/4" tall at the front and tapers down to 1" wide by 3/4" tall at the rear and is about 6" in overall length. From the hood to the highest point, being the curve of the horns, is about 4 1/2" to 5" tall. The eyes are mean lookin', though
.
.
Originally Posted by bigragu
With shipping, JCW was the same price as OEM. The ornament is soild to the base; no flex whatsoever. The body of the JCW ram seems to have a longer neck with a more lean, muscular look and the horns have more detail to them. It is the base that mounts to the truck that is rather big; about 2" wide by 1 1/4" tall at the front and tapers down to 1" wide by 3/4" tall at the rear and is about 6" in overall length. From the hood to the highest point, being the curve of the horns, is about 4 1/2" to 5" tall. The eyes are mean lookin', though
.
.
The foot print of the base sounds like it won't fit on the narrow ridge down the center of the hood. My base is about 3/4 wide and about 3-1/2 long and not over 3/8 inch high.
Or maybe I misunder stood your description.
The OEM needs 2 x 1/4 inch holes 2-5/8 apart and a 5/8 hole 3/4 inch behind the front 1/4 inch hole.
Front of hood o O o
Edwin
Or maybe I misunder stood your description.
The OEM needs 2 x 1/4 inch holes 2-5/8 apart and a 5/8 hole 3/4 inch behind the front 1/4 inch hole.
Front of hood o O o
Edwin
Send it back, buy OEM. I made the mistake way back when, ordered a chrome one from JC Junk. I had a goat from the factory, but mine was missing. Thought it would be a bolt up, nope. Bolt holes/studs do not match OEM holes in the hood. You have drill two new holes. Sure not a problem if you don't have a goat from the factory. I prefer OEM quality, not junk. It didn't even look as good as the OEM goat on my Dads truck at the time, so I returned it, and bought a new one from the dealer. Why put a el cheapo piece of junk on your truck when you can have a quality real deal piece. Just my opinion
.
.
Thread
Thread Starter
Forum
Replies
Last Post
dtrkstan
3rd Gen High Performance and Accessories (5.9L Only)
6
Dec 26, 2005 10:37 PM







