Well since I moved, I packed all my FSMs and haven't been able to dig them out.
Does anyone have a scan or PDF format to post or email of the Dodge INFINITY sound system wiring schematic?
I have one from a 95 stratus but it's different. I got a new MP3 stereo for the truck but I want to add it to factory INFINITY system. I have the amplifier and INFINITY speakers but need the schematics to wire it up.
Thanx in advance guys.... Rob

 

OI didn't think these trucks came with the infinity sound system back then

 

They didn't. I'm adding the INFINITY system to it and them exchanging the factory radio with an MP3player.
It's easy to do with the factory wiring schematic. The amplifier is wired between the rado and speakers and the speakers have a built-in power pack/amplifier. The system uses the same factory radios. The INFINITY system is the new style speakers and amplifier.

 

I guessing this is from the newer style trucks? what year exactly? Wiring the deck in is easy and the amp just needs a constant power and ground wire and then a trigger wire from the deck, along with the speaker wires of course.

 

The amp and speakers were out of a 1991-92 Dodge Caravan.

 

Well I don't think it should be too hard to wire it in but I also don't think it will sound the greatest. Best of luck to you!

 

I have the FSM and can send you the pages.
Give me a few hours, I am not at home and don't have it here at the office.

You are in for it.

I hope you got that system for free

 

I'll hook you up, but can I also vote for NOT messing with an Infinity system? It's more complicated than it's worth.

 

I've looked everywhere. I've been to two Radio install shops, a factory radio repair outlet and a dealer. The factory service manuals at the dealer don't show the wiring to and from the amp. It shows wiring in/out from the radio, to the plugs and speakers but does not show the amp.

PJ... If you've got it, I'll take it and I'l make it work.. Thanks Rob

 

PM me your e-mail address.


(Sorry! That user has specified that they do not wish to receive emails. If you still wish to send an email to this user, please contact the administrator and they may be able to help.)

 

how many wires you got comming out of the amp or slots to put wires?

 

My schematic doesn't even show an "amp" I always thought the "amp" was the amp/crossover that is bolted up to the back of the front door speakers.

That's what I saw when I opened up mine. If they are "amps" they are the smallest ones I've ever seen and have no heat sinks.

 

It has a BLUE 2 row plug with 12 wires in one row and 11 in the other and it has a grey 2 row plug with 7wires in one row and 8 wires in the second row.

 

I don't remember any of that? Does anything look similiar to the one I sent you?

I think, but can't swear there was 9 wires per side on the 6X9's.

 

Good Lord! Swap the whole mess out for a new, clean system!

Really - good luck in your endeavor!