Idler arm
#1
Registered User
Thread Starter
Idler arm
I changed the oil on my D250 and went to grease the front end and saw that the drag link had been hitting the cross member got to looking at the steering linkage and the idler arm is about to be a 2 part arm. So I called around local part stores and the moog K7055 was $140-180 O'rileys being the highest and a day's wait. On line the same Moog part was $52-70 and 2-3 day wait. Boy if you want to put the cheap made one in you can get one for $10-20. long live the local parts houses Ken
#3
Registered User
Thread Starter
I called cost less in Vancouver Wa $80.00. for MOOG not in stock but could order it . house brand $20. But I have not had good dealing with them called up at 8 PM do you have this part I need it tonight yes we have it ok put it in will call I will be there by 9 it a 40 mile drive 1 way get ther we don't any parts in will call for you and we don't even stock that part not 1 time but 2 times first was for me 2nd time I get a call from my borther can you run by CL and pick up a part get ther it the same thing not in will call and we don't stock that part A/Holes Ken
Thread
Thread Starter
Forum
Replies
Last Post