Hood down flush
#1
Registered User
Thread Starter
Hood down flush
I can't get the hood down flush with the fenders on the 92. No ajustment in the latch or the latch strike. The 93 is fine , so I measured the latch strike and there different by a half inch, thats about what I need. Any one have a shorter 1 can buy? Thats only the second thing I have found different between the 92 & 93 so far. 93 measures 1-1/8 from the sheet metal of the hood to the outer edge, 92 measures 1-11/16
I know it not a big deal but it bugs me. Oh and they havn't been wrecked.
I know it not a big deal but it bugs me. Oh and they havn't been wrecked.
#3
Registered User
Thread Starter
I have lower them, the hood will rock side to side with the hood latched. Its the latch strike that is holding it up. I don't see any other way of adjustment to lower it. Am I missing something? The back of the hood at the hinges line up with the fenders.
How tall or what does your latch strike measure?
How tall or what does your latch strike measure?
Thread
Thread Starter
Forum
Replies
Last Post
CACalomino
3rd Gen Engine and Drivetrain -> 2003-2007
16
03-22-2010 06:35 PM
Sam Turner2
3rd Gen High Performance and Accessories (5.9L Only)
8
11-18-2008 10:17 AM
Eddy Reyes
3rd Gen High Performance and Accessories (5.9L Only)
18
06-28-2007 12:06 PM