Holset turbo Identifaction
#1
Holset turbo Identifaction
I bought this online thinking it was a 351 since it had the electronic solenoid. Get it and its smaller than a 351 the Comp size is 56mm.
Also it has a port on the compressor housing for something not sure what though. Not sure what it came off of. The guy that had it, had it for a neon. Don't mind the outlet being cut off I didn't do it.
Also it has a port on the compressor housing for something not sure what though. Not sure what it came off of. The guy that had it, had it for a neon. Don't mind the outlet being cut off I didn't do it.
#5
Registered User
It could be the HE341 from the earlier, '03-'05(?) 3rd gens. The only difference being the smaller compressor wheel. The HE351CW has a compressor inducer diameter of 60mm.
Trending Topics
#8
I dug it out. Here's a curveball.....My digital calipers were dieing on me and threw me all sorts of numbers new battery in it. and I'm getting a reading of
Inducer: 54.5-55mm
Exducer: 76mm.
BAE Turbos list a 54mm inducer but with a 78mm exducer.....I'm still not sure what I have. because all the "he341s" which in my digging is actually an hy35 type D. has a 58mm wheel.
Inducer: 54.5-55mm
Exducer: 76mm.
BAE Turbos list a 54mm inducer but with a 78mm exducer.....I'm still not sure what I have. because all the "he341s" which in my digging is actually an hy35 type D. has a 58mm wheel.
Thread
Thread Starter
Forum
Replies
Last Post
weasel
3rd Gen High Performance and Accessories (5.9L Only)
3
03-31-2005 08:57 AM
Cummins600
3rd Gen Engine and Drivetrain -> 2003-2007
1
03-30-2004 01:21 PM