Help with brakes.. 1st gen swap
#1
Help with brakes.. 1st gen swap
Hi all. I was going through a dumb conversion but now found a better one and need help
I'm looking at putting a 1st gen cummins 12v into a 96 chevy pick up
but it has hydroboost brakes
i was wondering if i could T off of the pressure line to feed the hydroboost set up?
or do i need two high pressure ports on a different pump?
I'm looking at putting a 1st gen cummins 12v into a 96 chevy pick up
but it has hydroboost brakes
i was wondering if i could T off of the pressure line to feed the hydroboost set up?
or do i need two high pressure ports on a different pump?
The following 3 users liked this post by Raziel:
The following users liked this post:
mknittle (03-21-2018)
#5
Registered User
Thread
Thread Starter
Forum
Replies
Last Post
92GhostRyder
1st Gen. Ram - All Topics
27
09-16-2018 12:02 PM
thechoochlyman
1st Gen. Ram - All Topics
24
10-26-2016 04:15 PM
SkyHarborCowboy
1st Gen. Ram - All Topics
6
11-20-2012 08:58 PM
gator_grabber
24 Valve Engine and Drivetrain
4
10-01-2008 11:04 PM