Heater Box Removal
#1
Registered User
Thread Starter
Heater Box Removal
Just pulled my old heater box apart on my 1st gen build and found mice got in and ate all the foam...made a mess in there....
So I am going to head to the yard and grab a heater box assembly; does anyone know if it can be pulled out of the truck without removing the dash?
Looks like at least the glove box has to come out....
So I am going to head to the yard and grab a heater box assembly; does anyone know if it can be pulled out of the truck without removing the dash?
Looks like at least the glove box has to come out....
The following users liked this post:
Daytrepper (10-01-2016)
#4
Registered User
Ya it's a awful job but can be done without pulling the dash
But if you are at a junkyard just cut the windshield rubber around each dash screw and yank the dash
But if you are at a junkyard just cut the windshield rubber around each dash screw and yank the dash
The following users liked this post:
Daytrepper (10-03-2016)
Thread
Thread Starter
Forum
Replies
Last Post
canadakonrad
3rd Generation Ram - Non Drivetrain - All Years
1
12-01-2010 08:41 PM
wdimig
2nd Gen. Dodge Ram - No Drivetrain
4
09-29-2010 07:38 PM
trik396
3rd Gen High Performance and Accessories (5.9L Only)
11
06-01-2008 07:04 PM
04ctd
3rd Gen High Performance and Accessories (5.9L Only)
2
10-05-2006 08:27 PM