Heater blower motor
#1
Registered User
Thread Starter
Heater blower motor
All of a sudden my AC blower started making a hell of a vibration/racket on high speed. A few days ago, I distinctly smelled "mouse smell" inside the cab. Since the blower motor is only a year old, I figured a mouse had gotten in there, which it had along with one baby (yes, I searched for more). After pulling out the newly dead mice, I sprayed everything with chlorox and reinstalled the blower motor. Now, no matter where I set the blower vent control, I only have air blowing out the defrosters. I may have inadvertently pushed on the interior vent door located just inside and above the blower motor while cleaning. Any suggestions for restoring all controls? They all worked fine before taking the blower motor out. This is on a 2001 2500 where the motor is located beneath the glove box.
#2
Administrator
Make sure you reconnected the small vacuum line next to your heater core, it controls all of the vacuum actuators.
Edit:
Oops, I see now it's a 2001, looks like you are in the wrong section but the same idea applies,
Check your vacuum lines.
Edit:
Oops, I see now it's a 2001, looks like you are in the wrong section but the same idea applies,
Check your vacuum lines.
Thread
Thread Starter
Forum
Replies
Last Post
Jim Lane
1st Gen. Ram - All Topics
14
04-05-2020 06:03 AM
moparman13045
1st Gen. Ram - All Topics
14
02-15-2012 06:53 AM
lucey
3rd Gen High Performance and Accessories (5.9L Only)
4
09-28-2009 11:39 PM
Copenhagenjunkie
2nd Gen. Dodge Ram - No Drivetrain
2
06-01-2003 04:20 PM