turbolover69

Hey DTR I'm installing a 4 inch skyjacker lift kit on my truck and my rear shackle on the driver side is seized up and rusted so I need to cut it out and replace it

I called the dodge dealership near me in San Diego and they said its a part that is no longer manufactured because the vehicle is too old, its a 1992 W250 Cummins 3/4 ton which shocked me because I see a lot of the old trucks on the road.

I need rear of rear shackles on both sides.

Does anyone have a source for this part or a part # I can give to dodge in case they are looking up the wrong part for me. Thanks a lot guys.

mknittle

I got mine here.
1990-1993 Dodge Pickup (3/4 Spring Bolts) (2.5 Wide Spring) - Rear of Rear Shackle [M1749] | $54.95 | SD Truck Springs | Leaf Springs, Helper Springs and Suspension Parts

turbolover69

Those were the ones I was looking at, just about the only pair I could find online. Are they good quality?

mknittle

Seem to be as good as the stock ones.

BHD

I get mine from Stengel Bros, cheap and good quality. They have the 0.75" shackles too I believe.

330-184 DODGE STAMPED SHACKLE

I have two pairs of them in service for quite a few years with no issues.

Here it is:
330-185 DODGE STAMPED SHACKLE

Family owned company, good people to deal with in my experiences.

MrFusion

Dorman 722-228 shackle and bolt kit looks like it should fit as well.